 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
The basic structure of OGSOL acrylate is bisaryl fluorene, with the advantages of a high refractive index, low cure shrinkage, and high transparency. Our lineup includes OGSOL EA, the standard type, and the OGSOL EA-F series whose viscosity is reduced to improve handling performance. As photoinitiators (or thermal polymerization initiators) are added to these products, it is easy to cure them by UV irradiation (or heating).
|
 |
 |
| Product name | OGSOL EA-0200 |
OGSOL EA-F5003 |
OGSOL EA-F5503 |
OGSOL EA-F5510 |
(For reference) Bis-A type acrylate |
||
|---|---|---|---|---|---|---|---|
| Advantages | High refractive, low shrinkage |
High refractive, low viscosity |
High refractive, low viscosity |
High refractive, low viscosity |
— | ||
| Appearance | Clear viscous liquid | Clear viscous liquid | Clear viscous liquid | Clear viscous liquid | Clear viscous liquid | ||
| Solvent content | Contained | Not Contained | Not Contained | Not Contained | — | ||
| Viscosity (mPa · s : 25℃) |
Before curing | > 100,000 | 2,000-3,000 | 2,000-3,500 | 10,000-15,000 | 800-1,000 | |
| Refractive index (589 nm) |
1.616 | 1.581 | 1.591 | 1.598 | 1,538 | ||
| Hue (APHA) | < 100 | < 50 | < 50 | < 50 | < 50 | ||
| HAZE | — | < 0.1 | < 0.1 | < 0.1 | < 5 | ||
| Transmittance rate (% : 400nm) |
After curing | Film Per (100μm) |
85.3 | 85.4 | 85.6 | 85.1 | 86.5 |
| Refractive index (589 nm) |
Film Per (100μm) |
1.626 | 1.607 | 1.614 | 1.616 | 1,562 | |
| Tg (℃) | 179 | 113 | 127 | 141 | 83 | ||
| Volume absorption coefficient (%) | Bulk (2mm) |
1 | 3 | 4 | — | — | |
| Water absorption (%) | 0.08 | 0.09 | 0.11 | — | 0.24 | ||
* The data shown in the table are for the purpose of reference only. Listed values are not intended to provide any guarantee for products.
◎Products which provide a high hardness and high heat resistance
have been developed in addition to the high refractive rate. Contact the following
section for more details.
|
|
|
 |
 |